CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
5.1 Consumable and replacement cycle
5.2 Replacing the brake roller
5.3 Replacing the pick roller set
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
5.1 Consumable and Replacement Cycle (Continued from the previous page)
ā When Consumables Cannot Be Replaced Immediately
1. To continue scanning of the current document, click the [Ignore] button. To stop scanning, click the [Cancel] button.
2. Replace the consumable as soon as possible when the message is displayed. For details on how to replace consumables, refer to
"5.2 Replacing the Brake roller" and "5.3 Replacing the Pick roller set".
3. To disable display of this message, mark the "This message not display again" check box. Note that when the "This message not
display again" check box is marked, this message is not displayed until the consumables counter is reset. To display the message
again after scanning 1,000 sheets, mark the [Warns again after scanning 1,000 pages] check box.
1 | 2 | 3 | 4 | 5 | 6 | 7
All Rights Reserved, Copyright (C) PFU LIMITED 2003
To Next Page
Loading...
Need help?
General