CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
2.1 Turning the scanner ON/OFF
2.2 Setting the ADF
2.3 Loading documents onto the ADF
2.4 Scanning document using the Flatbed
2.5 Scanning documents
2.6 How to use the Scanner Driver
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
2.4 Scanning document using the Flatbed
1. Open the document cover holding its handle.
ATTENTION
Confirm that there is no document on the ADF paper chute and the stacker.
2. Place the document face-down onto the document bed adjusting it to the reference lines.
3. Close the document cover carefully and start scanning.
With the Flatbed, you can easily scan thick documents such as books and documents of non-standard sizes documents.
All Rights Reserved, Copyright (C) PFU LIMITED 2003
To Next Page
Loading...
