CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
3.1 Scanning double sided documents
3.2 Scanning documents with different widths
3.3 Scanning document longer than A3 size
3.4 Saving scanned images in PDF format
3.5 Selecting a color to drop out
3.6 Skipping blank pages
3.7 Detecting double-feeds
3.8 Correcting skewed documents
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
3.7 Detecting double-feeds (Continued from the previous page)
3. Select the detection conditions from [Double Feed Detection] under [ADF Option]. The following are the detection conditions
None Double-feed detection is not performed
Check overlapping
The scanner monitors the overlapping of documents.It detects a double-feed by differences in document
thickness when two or more document sheets are fed overlapping.
Check length
The scanner monitors the length of documents. It detects a double-feed by differences in the document length
when two or more document sheets are fed overlapping.
Check overlapping and length The scanner monitors both document overlapping and length to detect double-feeds.
4. Click [ OK ] button to return to [ TWAIN driver ] dialog box. Perform the scanning operation on the dialog box.
For details, refer to "8.5 Double feed detection conditions".
1 | 2 | 3
All Rights Reserved, Copyright (C) PFU LIMITED 2003
To Next Page
Loading...
Need help?
General