x
Do not take apart or modify the scanner as high-voltage components inside the scanner
are dangerous. PFU assumes no liability to any damage caused by taking apart the
scanner, as doing so is not covered under the warranty.
The area around the part to which this warning label is affixed can become very hot.
To avoid burns, never touch around the area indicated by this label.
Firmly insert the power cable into the AC outlet. Not doing so may cause a fire or electric
shock.
Use the scanner only at the indicated power voltage and current. Do not connect to
multiplepower strips. Improper power voltage or current might cause a fire or electric
shock.
Use only power cables provided with the scanner. Do not use any extension cords. Not
following these instructions may cause abnormal heat or a fire. Do not also use the power
cable provided with the scanner for other devices, since this might cause problems such
as an equipment failure, or an electric shock.
Do not install in places that are damp or subject to smoke, steam, or dust, as this may
cause a fire or electric shock.
To Next Page
Loading...
