89
3.10 Multi Image Output
3
SCANNING VARIOUS TYPES OF DOCUMENTS
3.10 Multi Image Output
It is possible to get an output both in Color/Grey scale and binary black and white.
This function may not work properly depending on the application software you use.
The Multi Image setting can be done on the Scanner Driver.
The following operation uses the TWAIN driver.
1. Start TWAIN Driver from your scanning application.
Refer to “2.10 Scanning Documents” on page 30.
2. Please check the [Enable Multi Image] checkbox in the [TWAIN Driver] window.
* When [Long Page..] is specified at [Scan Type:], you can not check this checkbox.
Main screen
Original
Output
Example： Color document scanned with Multi Image.
To Next Page
Loading...
