Fujitsu fi-5950 - Resetting the Password

181
8.1 Scanner Settings
8
SCANNER SETTINGS
Resetting the Password
In case you forgot your password, it can be reset in the following procedure.
1. Right-click the Software Operation Panel icon in the taskbar, and select
[Password Setting] from the menu.
⇒ The [Password setting] dialog box appears.
2. Enter the default password which is “fi-scanner”, and click the [OK]
button.
⇒ The [Password setting] dialog box appears.
3. Enter a new password then again to confirm, and click the [OK] button.
Up to 32 characters can be used for the password.
Note that only alphanumeric characters (a to z, A to Z, 0 to 9) are allowed.
⇒ A message dialog box appears.
4. Click the [OK] button.
⇒ The password is set.