189
8.3 Offset/Scan scale
8
SCANNER SETTINGS
3. Adjust the Offset/Scan scale as necessary.
Offset Setting
Unit: Select ADF front or ADF back as target.
Main: Adjusts the horizontal Offset.
Setting range -2mm to +3mm, in steps of 0.5mm.
Sub: Adjusts the vertical Offset.
Setting range -2mm to +3mm, in steps of 0.5mm.
Vertical magnification
Adjustment
Unit: Select ADF front or ADF back as target.
-6.3%/6.3%: Adjusts the vertical (document length) Scan scale.
Setting range -6.3% to +6.3%, in steps of 0.1%.
To Next Page
Loading...
