U41578-J-Z875-1-76 27
Starting the Spheras GUI under MS Windows Client
name. If the two names are different, this means that the installation was
not completed correctly, will not function correctly and must be
reinstalled.
If the “plus” box in front of the top item is missing, the host does not “see”
the FibreCAT S80. Check your HBA and/or cabling / Start Spheras Agents
Check under “Services” if the Spheras Agent SB2500 is still running. If not,
restart HBA, using HBA anywhere, restart Agent.
Click the host name (“Stora 100”, in our example). This displays a menu tree
showing the components of the FibreCAT S80 connected up to the system .
Configuration of your FibreCAT S80 begins here.
To Next Page
Loading...
