Getting started English - 9
Settingupthedevice
To ensure that the casing is sufficiently ven tilated and to prevent overheating, the device
must be operated with the base foot attache d and with the unit free-standing.
If the device is to be built-in, adequate ve ntilation must be assured.
Fit the base feet for horizo
ntal or vertical operation (see "
Vertical op erating position ",
Page 9 - English and "Horiz
ontal operating position (o ptional) " , Page 10 - English).
Base feet for horizontal
operation are available as an option .
Vertical operating pos
ition
VerticaloperatingpositionOperating position,verticalBasefeetSid ecover
Use th e supplied foo t when the device is to b e used in a vertical po sition.
Proceed as follows to operate the device in the vertical operating position:
► Disconnect the cables if required.
► Push the device onto the foot in the direction of the arrow.
► If necessary, reconnect any cables that were previously disconnected.
Fujitsu Technology Solutions 45
To Next Page
Loading...
