Fujitsu FUTRO S700 - System expansions; Removing the Power over Ethernet module

System expansio ns English - 29
Removing the Power over Ethernet module
PoweroverEthernetmodule
► Open the casing (see "Opening the casing", Page 20 - English).
1
1
2
► Undo the screws (1).
► Pull the Power over Etherne t module in the direction of the arrow (2) out
of the slot and lift it out of the casing.
► Close the c asing (see "
Closing the c asing", Page 21 - English).
Ensure that cables are not trapped between the casing and the co mponents.
Fujitsu Technology Solutions 65