System expansio ns English - 23
Installing and rem oving a WLAN module (optional)
You can install an additional WLAN module in your device.
Alternatively, you can install a Power over Ethernet module in the same
slot. You can only install one of the modules.
Installing the WLAN modul
e
WLAN module
► Open the casing (see "Opening the casing", Page 20 - English).
3
3
1
2
4
► Break the cover (1) out of the casing.
► Place t
he WL AN module in the casing with the compone nt side facing dow nwards and push it
in the d
irection shown by the arrow (2) through the opening in the back of the casing.
► Secure the WLAN module with the screws (3).
► Conne
ct the cable of the WLAN module to the connector on the mainboard (4).
Fujitsu Technology Solutions 59
To Next Page
Loading...
