EasyManua.ls Logo

Fujitsu FUTRO S700 - Getting started; Ports on the device; Connecting a monitor

Fujitsu FUTRO S700
107 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12 - English Getting started
Ports on the d evice
PortsExternaldevicesDevice
The ports are located on the front and rear side of the device. The ports available on
your device depend on the conguration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the m anual for the mainboard.
Headphones, light green
Headphones
Microphone port, pink
Microphone port
Audio output (Line Out), light
green
AudiooutputLineout
Audio input (Line In), light blue
AudioinputLinein
+
+
DisplayPort DVI-I m onitor port, white
Monitorport
USB - Universal Serial Bus,
black
UniversalSerialBus
RJ45-LAN port
LANport
PS/2 mouse port, green
MouseportPS/2mouseport
PS/2 keyboard port, purple
Keyboardport
Serial port, turquoise
Serialport
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device and operating system).
Connecting a monitor
Follow the i
nstructions conta ined in the monitor manual to prepare the monitor
for operati
on (e.g. c onnecting cables).
Monitor,
Connect the data cable to the required m onitor port on your device.
Plug the mo
nitor power cable into the grounded mains outlet.
48 Fujitsu Technology Solutions

Table of Contents

Other manuals for Fujitsu FUTRO S700

Related product manuals