Fujitsu FUTRO S700 - System expansions; Installing and removing a Power over Ethernet module (optional); Installing the Power over Ethernet module

System expansio ns English - 27
Installing and removing a Power
over Ethernet
module (optional)
You can install an additional P
ower over Ethernet module in your device.
Alternatively, you can insta
ll a W LAN mod ule in the same slot. You
can only install one of the mo
dules.
If you are supplying the sy
stem with power via the PoE module, ensure that
no additional power suppl
y (mains adapter) is connected.
Installing the Power over Ethernet module
PoweroverEthernetmo
dule
► Open the casing (see "Opening the casing", Page 20 - English).
1
2
► Break the cover (1) out of the casing.
► Place the Power o ver Ethernet m odule in the casing with the component side
facing upwards (2). Ensure that it engages in the slot.
Fujitsu Technology Solutions 63