10 - English Getting started
Horizontal operating position (optional)
Proceed as follows to operate the device in the horizontal operating position:
HorizontaloperatingpositionOperatingpos ition,horizonta lBasefeet
► Disconnect the cables if required.
► Place the device on its upper side on a sturdy, flat and clean surface.
► Position th e ba se feet on the underside of th e device.
1
1
1
1
► Screw on the base feet with the screws (1).
► If necessary, reconnect any cables that were p reviously disconnected.
46 Fujitsu Technology Solutions
To Next Page
Loading...
