Operation English - 17
Realtek RTL 8139 / 8130 / 810x BOOT Agent
Configuration Menu v2.13
Network Boot Protokol PXE [RLP]
Boot Order Int19h [PnP/BEV(BBS)
/ROM Disabled/
Int18h]
Show Config Message Enable [Disable]
Show Message Time 3 Seconds [5 / 8]
<ESC> <Space> <F4>
Quit
Configuration menu screen.
The following settings are possible:
Network Boot
Protocol:
PXE (standard)
or RPL
Specification of the system boot protocol used.
Boot Order: Int 19h
The network is a lwa ys started first before the local
devices are activated.
PnP/ BEV (BBS)
If a BBS-BIOS (
BIOS Boot Specification) exists,
the system is s
tarted by the BBS-BIOS.
ROM Disabled
The entire mechanism for the system boot is
deactivated. The system c an only be activated via
the local devices.
Int 18h
The devices set in BIOS Setup are enabled.
Show Config
Message:
The following message can be activated or deactivated during the
system boot:
Realtek RTL8139(X)/8130/810X Boot Agent Press Shift-F10
to configure …….
Show
Message
Time:
Indica
tes the time in seconds for wh ich the following message is
displa
yed during the system boot:
Realt
ek RTL8139(X)/8130/810X Boot Agent Press Shift-F10
to con
figure …….
The settings are not effective until after saving and another PXE system boot.
Fujitsu Technology Solutions 53
To Next Page
Loading...
