First-time setup of your device
Switching on the device for the first time
Switchingonforthefirst time
On device s with ON/OFF switch for wireless components: Slide the ON/OFF switch
for w ireless components to the ON position before switching on the device.
When you switch on the device for the first time, the supplied software is
installed and configured. Because this pro ced ure must not be interrupted,
you should set aside enough time for it to be fully comp leted and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use y
our device for the first time, the operating system
is pre-installed on th
e hard disk.
► Switch on your device.
► During instal
lation, follow the instructions on scree n.
If a W indow s o
perating system is installed on your device, you will find more
inform ation
on the system and drivers, help programmes, updates, manuals etc.
on the d evice
or o n the Internet at "
http://ts.fujitsu.com/suppor t".
Fujitsu Technology Solutions 17
To Next Page
Loading...
