Security functions
Trusted Platform Module (TPM) (device-dependent)
TPMTrustedPlatform Module
To use the TPM, you must activate the TPM in the BIOS Setup before the software
is installed. The condition for this is that you have assigned at least the supervisor
password (see "
Secu rity fu nctions", Page 4 8).
Enabling TPM
• Requirement: You have assigned a superviso r password, see "Secu rity functions", Page 48.
► Call up the BIO S Setup an
d select the Security menu.
► Mark the TPM Security Chip Setting field and press the Enter key.
► Select Enabled to acti
vate the TPM .
Once you have a ctivated the TPM the Clear Security Chip option appears.
Select Clear Securit
yChipto delete the holder in the TPM. By clicking on Enabled,
all secret keys (e.g
. SRK - Storage Root Keys, AIK - Attestation Identity Keys
etc.) generated by
applications are deleted.
Please note that yo
u will then no longer be able to access the data you have
encrypted with th
e keys based on that holder.
► Select the Exit Sa
ving Changes option in the Exit menu.
► Press the Enter key and select Yes.
The notebook wil
l r estart, and TPM will be enabled after the reboot.
Disabling TPM
• Requirement: You have assigned a superviso r password, see "Secu rity functions", Page 48.
► Call up the BIO S Setup and select the Sec urity menu.
► Mark the TPM Security Chip Setting field and press the Enter key.
► Select Disabled to deactivate the TPM.
► Fr om the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.
Yo ur notebook will now restart and TPM will be disabled.
Fujitsu Technology Solutions 53
To Next Page
Loading...
