Settings in BIOS Setup Utility
Exiting B IOS Setup Utility
BIOSSetupUtility
You need to select the desired option in the Exit menu and activate it by pressing the Enter key:
Exit Saving Changes - save ch
anges and exit BIOS Setup Utility
► To save the current m enu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.
The note book is rebooted
and the new settings come into effect.
Exit Discarding Changes – Discard changes and
exit BIOS Setu p Ut ilit y
► To discard the changes, select Exit Discarding Changes and Yes.
The settings in place when BIOS Setup Utility was called remain effective. BIOS
Setup Utility is te rminated and the notebook is rebooted.
Load Setup Defaul
ts – Copy Standard Entries
► To copy the standard ent ries for all menus of the BIOS Setup Utility,
choose Load Setup Defaults and Yes.
Discard Changes – Discard changes withou t exiting
the BIOS Setup Utility
► To discard the changes you have made, select Discard Changes and Yes.
The settings in place when B IOS Setup Utility was called remain effective.
You can now make additional settings in the BIOS Setup Utility.
► IfyouwanttoexitBIOS Setup Utilitywith these settings, select Exit Saving Changes and Yes.
Save Chan
ges - save changes without exiting
the BIOS Setup Utility
► To save th e changes, select Save Changes and Yes.
The changes are saved. You can now make additional se ttings in the BIOS Se tup Utility.
► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.
Save Changes and Power Off
► To save the changes and switch off your d evice, select Save Changes and Power Off and Yes.
The c hanges are saved. Your device is shut down.
70 Fujitsu Tech nology Solutions
To Next Page
Loading...
