Removing and installing components
during servicing
Attaching the cover
2
2
1
► Place the cover in the correct mounting position (1).
► Fasten the screws (2).
Finishing
component removal
After you have removed or changed the system com ponents as you required, please
prepare your device for operation again as follows:
► Install the battery ag ain (see "
Installing a battery", Page 34).
► Turn the notebook the right way up again a nd place it on a flat surface.
► R eco nnect the cables that you disconnected before.
68 Fujitsu Tech nology Solutions
To Next Page
Loading...
