Working with the notebook
Inserting the card
Keep the placeholder for the slot in a safe place. When you re move the card again, you
must reinstall the place holder. This prevents foreign objects from getting into the slot.
1
2
► Press the edge of the placeholder (1)
to make the card placeholder protrude
from the notebook’s case.
► Pull the card placeholder out of the slot (2).
► Insert the card into the slot guide with
the connection contacts first.
► Gently push the card into the slot until you
feel it click into place. Do not use any force.
Depending on the particular type used, the
card may pro trude slightly f rom the slot.
Please see the documentation relating to the card for driver installation instructions.
Fujitsu Technology Solutions 39
To Next Page
Loading...
