Connecting external devices
Connecting an e xternal SATA hard disk (eSATA)
An external SATA hard disk can be connected at the eSATA port. This allows you
to expand the interna l hard disk capacity as you wish.
The length of the eSATA cable must not exceed 2 metres. Consult a specialist
dealer for advice on which eSATA data cable is suitable for yo ur exte rnal eSATA
hard disk. Make sure that the hard disk has its own external power supply.
The data transfer rate is up to 2,400 M bit/s.
eSATA
► Connect the data cable to the external
device.
► Connect the data cable to the eSATA port.
Device drivers
The eSATA hard disk is automatically recognised by your operating system and insta lled.
You will find more information in the documentation for the external SATA
hard disk and the operating s ystem.
Safe removal of eSATA and USB devices
Always corre
ctly remove the device according to the rules described below,
to ensure tha
t none of your data is lost.
► Left-click on the symbol to remo ve hardware sa fely.
► Select the
device you wish to shut down and remove.
► Press the "Enter" key.
Wait for t
he dialogue box which tells you that it is now safe to remove the device.
Fujitsu Technology Solutions 59
To Next Page
Loading...
