Security functio ns
Setting supervisor and user password
► Start the BIOS Setup Utility and go to the Security menu.
► Select the Set Supervisor Password field and press the Enter key.
With Enter new Password: you are asked to enter a password.
► Enter the password and press the Enter k ey.
Confirm new Password requires you to confirm the password.
► Enter the pa ssword again and press the En ter key.
Changes have been saved is a c onfirmation that the new password has been saved.
► To set the user password, select Set User Password and proceed exactly as
when configuring the supervisor password.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
PasswordSupervisorpas swor
d
Userpassword
The notebook will be rebooted and the new password will come into effect. It will now be
necessary to first enter your supervisor or user password in order to open the B IOS Setup Utility.
Please note that the user password only provides access to a few of the BIOS settings.
Changing the sup er vi so r or user pas sword
You can only change the supervisor password when you have logged into the
BIOS Setup Utility with the s upervisor password.
PasswordSupervisorpasswordUserpassword
► Call the BIOS Setup Utility andgototheSe curity menu.
► When changing the password, proceed exactly as for password assignment.
Removing passwords
To remove a password (without setting a new password) perform the following steps:
PasswordSupervisor
password
Userpasswo
rd
► Start the BIOS Setup Utility and go to the Security menu.
► Highlight the Set Supervisor P assword or Set User Password field an d press the Enter key.
You will be requested to enter the current password by the Enter Current Password prompt.
You will be requested to enter a new password by the Enter New Password prompt.
► Press the Enter key twice.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.
The notebook will now reboot with the password removed.
Removing the supervisor password simultaneously deactivates the user passw ord.
50 Fujitsu Tech nology Solutions
To Next Page
Loading...
