How to improve LCD screen readability on Fujitsu Laptop?
If the LCD screen is difficult to read, it may be due to reflected glare. Try turning the notebook or adjusting the tilt of the LCD screen. You can also increase the screen brightness.
What to do if external monitor is blank or the image is unstable on Fujitsu LIFEBOOK T725?
If the external monitor is blank or the image is unstable, the wrong external monitor may have been selected, or the wrong screen resolution has been set for the application program. Terminate the application program under Windows by pressing Alt + F4. If the error persists after terminating the program, use the key combination for switching the screen output in order to switch to the LCD screen of the notebook. Change the screen resolution and select the monitor as described in the documentation for your operating system.
Why is my Fujitsu LIFEBOOK T725 LCD screen blank?
If your Fujitsu Laptop's LCD screen remains blank, the screen may be switched off, so press a key or touch the touchpad. It is also possible that an external monitor or television set is connected. Press the key combination for changing over the screen output.
How to fix a Fujitsu LIFEBOOK T725 LCD screen that is difficult to read?
If the LCD screen of your Fujitsu Laptop is hard to read, it may be due to reflected glare. Turn the notebook or adjust the tilt of the LCD screen. You can also increase the screen's brightness.
What to do if external monitor remains blank when connected to Fujitsu LIFEBOOK T725 Laptop?
If the external monitor remains blank, first ensure that the monitor is switched on. If it is on, check if power saving mode is activated by pressing any key. Then, adjust the brightness of the monitor. Check that the screen output is not set to the notebook’s LCD screen, use the key combination for changing over the screen output. Finally, verify that the external monitor’s AC cable and data cable are properly connected, by switching off the external monitor and the notebook, checking the cable connections, and then switching them back on.
What to do if external monitor is blank or image is unstable on Fujitsu LIFEBOOK T725 Laptop?
If the external monitor is blank or the image is unstable, it could be due to the wrong external monitor being selected or the wrong screen resolution being set for the application program. Terminate the application program by pressing Alt + F4. If the issue continues, switch to the notebook’s LCD screen using the key combination. Change the screen resolution as described in your operating system’s documentation and select monitor 1 or 2.
What to do if my Fujitsu LIFEBOOK T725 Laptop cannot be started?
There are a few reasons why your Fujitsu Laptop might not be starting. Make sure the battery is correctly installed in its compartment. If the battery is dead, charge it, insert a charged battery, or connect the mains adapter. Also, verify that the power adapter is correctly connected to the notebook. Then, try switching the notebook on.
General| Form factor | Convertible (Swivel) |
|---|---|
| Product type | Hybrid (2-in-1) |
| Product color | Black, Silver |
| Bus type | DMI2 |
| Stepping | F0 |
| Tjunction | 105 °C |
| Processor cache | 3 MB |
| Processor cores | 2 |
| Processor model | i5-5200U |
| System bus rate | 5 GT/s |
| Processor family | Intel® Core™ i5 |
| Processor series | Intel® Core™ i5-5200 Mobile Series |
| Processor socket | BGA 1168 |
| Processor threads | 4 |
| Processor codename | Broadwell |
| Processor frequency | 2.2 GHz |
| Processor cache type | Smart Cache |
| Configurable TDP-down | 7.5 W |
| Processor lithography | 14 nm |
| Processor manufacturer | Intel |
| Processor front side bus | - MHz |
| PCI Express slots version | 2.0 |
| Processor boost frequency | 2.7 GHz |
| Processor operating modes | 32-bit, 64-bit |
| ECC supported by processor | No |
| PCI Express configurations | 4x1, 2x4 |
| Thermal Design Power (TDP) | 15 W |
| Configurable TDP-down frequency | 0.6 GHz |
| Maximum number of PCI Express lanes | 12 |
| Motherboard chipset | - |
| Memory slots | 1x SO-DIMM |
| Internal memory | 8 GB |
| Memory clock speed | 1600 MHz |
| Memory form factor | On-board + SO-DIMM |
| Internal memory type | DDR3-SDRAM |
| Maximum internal memory | 12 GB |
| Memory layout (slots x size) | 1 x 4 GB |
| AC adapter included | Yes |
| Intel® Virtualization Technology (Intel® VT) | VT-d, VT-x |
| SSD capacity | The Solid State Drive's storage capacity in Gigabytes. |
| SSD interface | SATA III |
| Storage media | SSD |
| Total storage capacity | 128 GB |
| Compatible memory cards | SD, SDHC, SDXC |
| Number of SSDs installed | 1 |
| Display surface | Matt |
| Display diagonal | 12.5 \ |
| Display brightness | 300 cd/m² |
| Display resolution | 1366 x 768 pixels |
| Native aspect ratio | 16:9 |
| Contrast ratio (typical) | 500:1 |
| On-board graphics card ID | 0x1616 |
| Discrete graphics card model | Not available |
| On-board graphics card model | Intel® HD Graphics 5500 |
| On-board graphics card family | Intel® HD Graphics |
| Maximum on-board graphics card memory | 16 GB |
| On-board graphics card base frequency | 300 MHz |
| On-board graphics card DirectX version | 11.2 |
| On-board graphics card dynamic frequency (max) | 900 MHz |
| Front camera resolution | 1920 x 1080 pixels |
| Front camera resolution (numeric) | 2 MP |
| 4G standard | LTE |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Bluetooth version | 4.0 |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Mobile network generation | 4G |
| Charging port type | DC-in jack |
| USB 2.0 ports quantity | 0 |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 3 |
| Pointing device | Touchpad |
| Keyboard number of keys | 84 |
| Recovery operating system | Windows 8.1 Pro |
| Operating system installed | Windows 7 Professional |
| Operating system architecture | 64-bit |
| Processor code | SR23Y |
| Processor ARK ID | 85212 |
| Processor package size | 40 x 24 x 1.3 mm |
| Supported instruction sets | AVX 2.0, SSE4.1, SSE4.2 |
| Intel Identity Protection Technology version | 1.00 |
| Battery life (max) | 13 h |
| Number of battery cells | 6 |
| AC adapter power | 65 W |
| AC adapter frequency | 50 - 60 Hz |
| AC adapter input voltage | 100 - 240 V |
| AC adapter output voltage | 19 V |
| Cable lock slot type | Kensington |
| Password protection type | BIOS, HDD, Supervisor, User |
| Storage temperature (T-T) | -15 - 60 °C |
| Operating temperature (T-T) | 5 - 35 °C |
| Storage relative humidity (H-H) | 8 - 85 % |
| Operating relative humidity (H-H) | 20 - 85 % |
Weight and Dimensions| Depth | 233 mm |
|---|---|
| Width | 316 mm |
| Weight | 1810 g |
| Height (rear) | 31.3 mm |
| Height (front) | 25.4 mm |
General safety guidelines that must be followed when operating the notebook.
Specific safety precautions for devices with wireless communication capabilities.
Steps for safely unpacking and inspecting the notebook for transport damage.
Instructions on how to properly connect the AC adapter for power.
Steps to power on the device for the initial setup and OS installation.
Covers opening, closing, switching on/off, and basic transitions.
Instructions on operating the device in tablet mode with touch/stylus input.
Details on using the touchpad and keyboard for notebook mode input.
Information on charging, caring for, storing, and replacing the battery.
Covers Wireless LAN, Bluetooth, 4G, UMTS/LTE antenna, and Ethernet/LAN.
Instructions for connecting and using the optional port replicator.
How to set up and use the fingerprint sensor for authentication.
Steps to configure password protection within the BIOS Setup Utility.
Securing the system boot process and hard disk access with passwords.
Steps to add or replace memory modules in the notebook.
Procedures for replacing or installing the notebook's hard disk drive.
How to enter and access the BIOS setup interface.
Recommended actions when encountering problems with the notebook.
Steps for backing up system data and restoring the OS.
To Next Page