Manufacturer’s notes
CE marking
CEmarkingCEmarkingNotesElectromagneticcompatibilityLowvoltagedi rective
The shipped version of this device complies with the requirements of EC directives 2004/108/EC
"Electromagnetic compatibility", 2006/95/EC "Low voltage directive", 2011/65/EU "RoHS directive"
and 2009/125/EC "ecodesign directive" (from 20/04/2016: 2014/30/EC "Electromagnetic
Compatibility" and 2014/35/EC "Low Voltage Directive").
CE marking for devices with wireless component
This equipment co mplies with the requirements of Directive 1999/5/EC of the E urop ean Parliament
and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment
and mutual recognition of conformity.
CE nnnn (!) ; nn nn: For digits and exclamation mark (!), see label on the product.
The product complies with the legal limits for SAR in the EU.
You can find more information and declarations of c onfo rmity on the Internet at:
"
http://globalsp.ts.fujitsu.com/s ites/certificates".
This equipment can be used in the following countries:
Belgium Bulgaria Denmark
Germany
Estonia Finland France
Greece
UK Ireland Iceland Italy
Latvia Liechtenstein Lithuania Luxembourg
Malta Netherlands Norway Austria
Poland Portugal Rumania
Sweden
Switzerland Slovakia Slovenia Spain
Czech Republic
Hungary
Cyprus Croatia
Turkey
Limitation in France: The use of WLAN in the 5 GHz band is not permitted outd oors.
Contact the corresponding government office in the respective country for current information on
possible operating restrictions. If your country is not included in the list, then please contact
the corresponding supervisory authority as to whether the use of this product is permitted in
your country.
The CE conformity declaration covers accessor ies (e.g., AC adapters, batteries, cable adapters)
and sof tware (e.g., m odule drivers, module firmware and operating system). The software used
and affecting compliance is purchased by the module vendors and under solely control of those.
Fujitsu 103
To Next Page
Loading...
