Fujitsu Lifebook T936 - Settings in BIOS Setup Utility; Starting the BIOS Setup Utility

Settings in BIOS Setup Utility
Settings in BIOS Setup Utility
BIOSSetupUtilitySystemsettings,BIOSSetupUtilityConfiguration,BIOS SetupUtilitySetupSystem configurationHardwareconfiguration
The BIOS Setu p Utility allows you to set the system functions and the hard ware
configuration for the notebook.
When it is delivered, the notebook is set to factory default settings. You can
change these settings in BIOS Setup Utility. Any changes you make take effect as
soon as you save and exit the BIOS Setup U tility.
The BIOS Setu p Utility program contains the following menus:
About
Displays information relating to the BIOS, processor and not ebook
System
Advanced system settings
Advanced
Configuration of various hardware components, such as mouse, keyboard,
processor
Security
Password settings and security functions
Boot
Configuration of the start-up sequence
Exit
Exits the BIOS Setup Utility
Starting the BIOS Setup Utility
► Reboot the devi
ce (switch off/on or reboot the operating system).
BIOSSetupUtility

Depending on the BIOS Setu p Utility se tting for Fast B o ot the following message
may ap pear on the screen at start-up:
<F2> BIOS Set
up <F12> Boot Menu
► Press the fu
nction key
F2
.
► If a passw ord h as been assigned, enter the password and press the Enter key.
If you have forgotten the password, contact y our system administrator
or contact our customer service centre.
The BIOS Setup Utility starts.
Fujitsu 87