Connecting external devices
Connecting an external monitor to the Port Replicator
An analogue monitor is connected to the an alogue VGA monitor port, a digital monitor
to the DisplayPort or to the D VI-D monitor port on the optional Port Replicator.
Monitor ou tput is limited to a maximum of two monitors at any one time (see "
Key
combinations", Page 41, section "Toggle output monitor").
MonitorVGAcon nectionsocketMonitorportMonitorport
Digital DisplayPort
Analogue VGA monitor port
Digital DV
I-D monitor port
► Sw itch off the notebook and th e external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First switch on the external monitor and then the notebook.
You can also switch be tween the external monitor a nd the LCD monitor of the
notebook, see chapter "
Key combinations", Page 41.
You can display the same picture on the external monitor and the
notebook L CD monitor simultaneously.
82 Fujitsu
To Next Page
Loading...
