Troubleshooting and tips
The notebook stops working
NotebookEnergysavingmode
Cause Troubleshooting
Notebook is in energy saving mo
de.
► Leave energy saving mode.
An ap plication programme has
caused the
malfunction.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
The battery is dead.
► Ch arge the battery.
or
► Insert a charged battery.
or
► Connect the mains adapt
er to the
notebook.
The printer does not print
Printerdoesnot p
rint
Cause Troubleshooting
The printer is not switched on. ► Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).
The printer is not connected correctly.
► Ch eck that the data cable connecting
the notebook to the printer is properly
connected.
The printer drive r is faulty or not correctly
installed, or it is the wrong printer driver.
► Ch eck that the data cable connecting
the notebook to the printer is properly
connected.
► Ch eck whethe
rthecorrectprinterdriveris
loaded (ref
er to the printer documentation).
The wireless connection to a network does not work
Thewire
lessconnection toanet w orkdoesnot work
Cause Troubleshooting
The wireless component is disabled.
► Switch the wireless componen t on (see
"
Switch ing th e wireless components on and
off", Page 52).
The wireless component is enabled. De sp ite
this, the wireless connection to a network does
not work.
► Ch eck whether the wireless connection is
switched on via the software.
► Furthe
r information on using the wireless
compo
nent can be found in the help files.
94 Fujitsu
To Next Page
Loading...
