Connecting external devices
USB port w ith charging function (Anytime USB charge)
USBchargingfunction
It is recommended that the note book be operated with the power supply connected
whenever the USB port with charging function is in use, as this function will drain
the battery more quickly if an external USB device is being charged.
The power supply unit must already be connected when the notebook is
switched off, as otherwise the USB charging function will be disabled a nd
the connected USB devices will not be charged.
Some USB devices (e.g. mobile telephones) require a driver in order to utilise the
USB c harging function. In this case the USB charging function will not work when the
notebook is switched off, as no drivers are active when the notebook is switched o ff.
You can use this
USB port to charge or sup ply power to a USB device (e.g. to charge
a PDA or a m obile
phone or to connect a USB lamp).
Charging is al
so possible when the Tablet PC is switched off, if the Anytime USB Charge function
is activated i
ntheAdvanced menu of the BIOS Setup utility. If the setting AC is selected thereby,
the device wil
l only be charged when the m a ins adapt er is connected.
How to remove USB devices correctly
Always correctly remove the device according to the rules described below,
to ensure that none of your data is lost.
► Le ft click on t he icon to safely remove hardware, located in the taskbar.
► Select the device which you w ant to shut down and remove.
► Press the Enter key.
Wait for the dialogue box which tells you that it is now safe to remove the device.
84 Fujitsu
To Next Page
Loading...
