Troubleshooting and tips
The cursor does not correctly follow the
pen movements
Cause
Fault elimination
Pen incorrectly calibrated
► C alibrate the pen as shown un der Hardware
and Sound / Tablet PC Setting s in the Control
Panel, see "
Setting the pen", Page 34 and
"
Calibrat ing the p en", Page 34.
Pen input not working
Cause
Troubleshooting
Incorrect driver installed.
► If your device is one which ca n only be
operated using the pen, install the drive r for
the standard model.
or
► If your device is one which can be
operated using the pen and by finger,
install the driver for the "Dual Digitizer"
model.
The notebook ca
nnot be started
Notebook
Cause Troubleshooti
ng
The battery is
not installed correctly.
► C heck whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
The battery is dead.
► C harge the battery.
or
► Insert a charged battery.
or
► C onnect the mains adapter to the
notebook.
The power adapter is not connected correctly.
► C heck whether the mains adapter is
connected co rrectly to the notebook.
► Switch the notebook on.
Fujitsu 93
To Next Page
Loading...
