Connecting e xtern a l devices
Connecting USB devices
USBports
On the USB ports, you can connect external devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a modem).
USB devices are hot-pluggable. This means you can connect and disconnect
devices while y our operating system is running.
USB 1.x has a maximum data transfer rate of 12 Mbit/s.
USB 2.0 has a data transfer rate of up to 480 Mbit/s.
USB 3.0 has a data trans
fer rate of up to 5 Gbit/s .
Additional informati
on can be found in the d ocumentation for the USB devices.
► Con nect t he data cable to the
external device.
► Connect the data cable to a USB
port o f the notebook.
Device drivers
USB devices will be automatically recognised and installed by y our operating system.
Fujitsu 83
To Next Page
Loading...
