Fujitsu M3093GX User Manual

● 7 - 21
4. At Screen 57,select the initial number.Press or to move the place of the blinking (changeable)
digit and press or to change the value, than press . The scanner displays Screen 58
Screen 58
NOTICE
The possible maximum number is 99999 (for five digits) or 16777215 (for eight digits).
5. At Screen 58,specify whether the number is initialized at hopper empty.Press or to select “On”
if you want to initialize, than press . The scanner displays Screen 59
Screen 59
6. At Screen 59,specify whether the number is reset at once.Press or to select “yes” if you want to
reset at once, than press . The scanner terminates the setup mode.
NOTICE
The command from the host computer overrides the specification of the operator panel.When the
host computer issues a command disabling the specification of the operator panel,Screen 59 does
not appear.
=
On / O
f
f
!
22 3
E
m
pt yRese
t
-
N
o/ Yes
!
2 24
R
e
s e t?
-

Fujitsu M3093GX Specifications

General

Brand	Fujitsu
Model	M3093GX
Category	Scanner
Language	English