Your LCD screen...
Further information
Details of how you s et t he resolution an d refresh r ate are provided in the documentation
for y our display adapter and the associated driver software.
For ergonomic reasons, use of the Dual-Link DVI or DP data cable and a screen
resolution of 2560 x 1440 pixels are recommended.
Because o f the technology used (active matrix) an L C D monitor provides a to tally
flicker-free picture even with a refresh rate of 60 Hz.
Notational conventions
Pay particu lar attention to text ma rked with this symbol. Failure to observe
these warnings could pose a risk to h ealth, damage the device or lead
to loss of data. The warranty will be invalidated if the device becomes
defective through failure to observe these warnings.
Indicates importan t information for the proper use of the device.
►
Indicates an activity that must be performed
Indicates a result
This font
indicates data entered using the keyboard in a program dialogue or at
the command line, e.g. your password (Name123) or a command used to
start a program (start.exe)
This font
indicates information that is displayed on the screen by a program, e.g.:
Installation is complete.
This font
indicates
• terms and texts used in a software interface, e.g.: Click on Save
• names of programs or files, e.g. Windows or setup.exe.
"This fon
t"
indicates
• cross-references to another section, e.g. "Safety information"
• cross-references to an external source, e.g. a web address: For more
information, go to "
http://fujitsu.com/fts/"
• Names of CDs, DVDs and titles o r designations of other materials, e.g.:
"CD/DVD Drivers & Utilities" or "Safety" Manual
Key
indicates a button on the monitor, e.g:
MENU
This
font
indicates terms and texts that are emphasised or highlighted, e.g.: Do
not switch off the d evice
6 Fujitsu
To Next Page
Loading...
