Operation
Changing the m onitor settings
When pu tting the monitor into operation for the first time, the screen display should
be optimally adapted to the display ada pter used.
Changing the m onitor setti
ngs with the touch
sensors of the co ntrol panel
The touch elements of the control panel have two functions. Whe n the OSD
menu is active, the current meaning of the touch element is shown directly
over the touch elements on the edge of the screen. With the O SD menu not
activated, you can make the following settings directly:
123
1 = Touch sensors for the OSD menu
(On-Screen-display)
2 = ON/OFF switch
3 = Power supply indicator
Select OSD language
If one of the touch sensors is being touched for the first time for the OSD menu,
the selection screen for the language is displayed:
► Touch the
ECO
/ or the
INPUT
/ sensor to select the r equired language.
► Touch the
MENU
/ sensor to confirm you r entries or the
AUTO
/ sensor to cancel the process.
After selecting the OSD language for the first time, you can change
it at any time in the OSD.
Performing auto-adjustment of the monitor
► Touch t he
AUTO
/ sensor for about 1 s econd.
The Auto Processing messa ge appears.
Picture quality and p osition are set to optimum values for your system.
20 Fujitsu
To Next Page
Loading...
