EasyManua.ls Logo

Fujitsu P27T-7

Fujitsu P27T-7
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Your LCD screen ...
Your LCD screen...
has a whole range of useful feature s and functions, e.g.:
TFT display (Thin Film Transistor; active matrix)
minimal space requirement
s thanks to slim c asing
optimum ergonomic cha racteristics (totally distortion-free, excellent picture
denition and co lour purity right into the corners)
high degree of brightne
ss and good co ntrast
High resolution v ia VGA (1920 x 1200) and HDMI (1920 x 1080)
Maximum resolution (2
560 x 1440) via DVI and Display Port
presentation of up to 16.7 million colours (in conjunction with an ap propriate display adapter)
automatic scanning o
f horizontal frequencies from 30 to 82 kHz and refresh rates
(vertical frequenci
es) from 56 to 76 Hz (absolutely icker-free)
digital screen controller with microprocessor for storing 36 different display modes
freely adjustable
colour alignment for matching the screen colours to the
colours of variou
s input and output devices
convenient operation via integrate d OSD (On-Screen-disp lay) menu
VESA-DDC compat
ibility
VESA-FPMPMI compat ibility (Flat Panel Monitor Physical Mounting Interface)
Mounting device for swivel arm or similar accessory
Plug&Play cap
ability
Digital video inputs (DVI, HDMI and Display Port DP) with HDCP
power manage
ment for reducing power consumption when the computer is not in use
Compliance w ith the recommendations according to TCO ’03
the monitor
fullls all GS ("Geprüfte Sicherheit", Certied Security) requirements.
This operating manual contains important information you require to start up and run your LCD m onitor.
A graphics card (display adapter) with V G A interface or a digital display adapter with DVI interface
or video signal source with DP interface is re quired to control the LCD monitor. The monitor
processes the data supplie d to it by the display adapter. The display adapter or the associated
driver soft ware is responsible for setting the modes (resolution and refresh rate).
When putting the monitor into o peration for the rst time, the screen display sh ould be
optimally adapted to the display adapter used and adjusted in acco rdance with your
needs (see chapter "
Changing the monitor settings", Page 20.
Target group
You do
n’t need to be an " expert" to perform the operations described here.
None
theless, it is important to always observe the safety notes given in the operating
inst
ructions for th e computer and in this manual.
In th
e event of any pro blems, please contact your sales ofce or our Service Desk.
Fujitsu 5

Related product manuals