Fujitsu P27T-7

Notes on ergonomic colour ad just men
t
Notes on e rgonomic colour adju
stment
If you select colours for the monitor in y our application programmes,
take note of the information below.
The primary colours blue and red on a dark backgrou nd do not produce the minimum
required con trast of 3:1 and are therefore not suitable for continuous text and data entry.
When using several colours for characters a nd b ackground and giving the primary colours full
modulation, you can obtain very suitable colour combinations (see the following table):
Characters
Background
black white purple blue
cyan green
yellow red
black
++
-
+++
-
white
+++
---
+
purple
++
-----
blue
-
+
-
+
-
+
-
cyan
+
--
+
---
green
+
--
+
---
yellow
+
-
++
--
+
red
-
+
----
+
+ C olour combination very s uitable
- Colour combination not suitable because colour h ues are too close together, thin characters
are not identifiable or rigorous fo cusing is demand ed of the human eye.
Fujitsu 27