EasyManuals Logo

Fujitsu plasmavision User Manual

Fujitsu plasmavision
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
E-5
EnglishDeutschEspañolFrançaisItalianoPortuguês
Póññêèé
中文
To prevent malfunction, be sure not to apply any form of severe shock to the remote control.
To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or
heating equipment.
Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.
PUTTING BATTERIES IN THE REMOTE CONTROL
(1) To remove the cover, slide it outwards
while pressing it down.
(2) Place two AA batteries in the remote
control. Make sure that the batteries are
properly oriented.
(3) Close the cover until it snaps into place.
PRECAUTIONS
CAUTION
Be sure to use replacement batteries of the same type as the original ones.
When disposing of used batteries, please comply with governmental regulations or environmental public institution’s rules that apply in your country/
area.
Note
The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.
Do not use rechargeable batteries (Ni-Cd, etc.).
MHD01661-02_E.book 5 ージ 2004年12月22日 水曜日 午後5時15分

Other manuals for Fujitsu plasmavision

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu plasmavision and is the answer not in the manual?

Fujitsu plasmavision Specifications

General IconGeneral
BrandFujitsu
Modelplasmavision
CategoryMonitor
LanguageEnglish

Related product manuals