Fujitsu plasmavision - Adjusting the Volume

E-13
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語
Póññêèé
中文
ADJUSTING THE VOLUME
Adjusting the volume
Press 1 to increase the volume.
Press 2 to reduce the volume.
* Note that the volume level remains stored even when you
turn OFF the power.
Muting the audio
Press -.
The audio is removed.
Press again to restore the audio to the original level.
The mute mode can also be released by pressing the volume
buttons.
* You can also use the buttons
on the display’s control
panel to perform these steps.
(Ex. the W model)
When the volume adjustment button is
pressed
Note
• Functions may not be available with some models and some device options.
MHD01661-02_E.book 13 ページ ２００４年１２月２２日 水曜日 午後５時１５分