E-16
OTHER BASIC OPERATIONS
CONVENIENT FUNCTIONS
On-screen information
Press 3.
The mode is indicated on the screen for 5 seconds.
Picture Mode
Press 4.
This button can be used to switch the picture mode.
In the picture mode, you can switch between the set status and the fine mode.
* For the picture mode settings, see “Setting Picture Mode (P. E-22)”.
Picture Memory
Press 5.
This button can be used to recall the settings of the picture memories 1 – 8. Each time this button is
pressed, the setting changes as follows.
* For the picture memory settings, see “Setting Picture Memory (P. E-22)”.
(Ex. the W/R models)
Note
• Functions may not be available with some models and some device options.
MHD01661-02_E.book 16 ページ ２００４年１２月２２日 水曜日 午後５時１５分
To Next Page
Loading...
