E-15
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語
Póññêèé
中文
RGB INPUT MODE
1
Press )-* to select the input
mode.
You can select between the modes from RGB1 to
RGB2.
The input terminal of each RGB mode is as follows.
[for the W/U models]
• RGB1: DVI-D
•RGB2: mD-sub
[for the R model]
• RGB1: mD-sub
* For selection of the input terminal, see
“SETTING THE INPUT TERMINALS” on
P. E- 3 1.
* You can also use the buttons
on the display’s control
panel to perform these steps.
(Ex. the U model)
RGB1 mode
MHD01661-02_E.book 15 ページ ２００４年１２月２２日 水曜日 午後５時１５分
To Next Page
Loading...
Need help?
General