Fujitsu plasmavision User Manual

E-19
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語
Póññêèé
中文
ADJUSTMENT MENU
The numbers in parentheses ( ) indicate the reference page numbers.
MENU
PICTURE (E-20) Signal Contrast (E-21)
POSITION/SIZE (E-27) Drive Contrast (E-21)
Black Level (E-23)
AUDIO (E-28) Brightness (E-21)
Detail Gradation (E-23)
FEATURES (E-29) Color (E-21)
3D NR (E-23)
FACTORY DEFAULT(E-35) Tint (E-21) CODEC NR (E-23)
Sharpness (E-21)
Image Enhance (E-24) Chroma Transient (E-24)
Ambient Sensor (E-21)
Color Temp. (E-24) Image identify (E-24)
Picture Mode (E-22)
User Color Temp. (E-24)
PrecisionSetting (E-22) Color Focus (E-25)
Picture Memory (E-22)
Progressive Scan (E-26) 24 Frame Mode (E-26)
Default
30 Frame Mode (E-26)
Jaggies Filter (E-26)
Position (E-27)
Motion Setting (E-26)
Size (E-27)
Default
Treble (E-28)
Bass (E-28)
Balance (E-28)
Loudness (E-28)
Adjustment (E-29) Dot Clock (E-29)
On Screen Menu (E-30) Clock Phase (E-29)
Input Terminal (E-31) Clamp Position (E-29)
Others (E-32) Auto Calibration (E-29)
OSD (E-30)
Language (E-30)
Name Select (E-30)
Video Input (E-31)
S-video Input (E-31)
D-SUB Input (E-31)
Auto Off-NO SIG. (E-32)
Audio Input (E-32)
Screen Orbiter (E-33)
Direct Setting (E-33)
Code Setting (E-33)
White Screen (E-33)
Exhibition Mode (E-34)
Information (E-34)
Note
• The shaded menu items are applied to the U model only.
• Some type of signal can not be selected.
MHD01661-02_E.book 19 ページ ２００４年１２月２２日 水曜日 午後５時１５分

Fujitsu plasmavision Specifications

General

Brand	Fujitsu
Model	plasmavision
Category	Monitor
Language	English