Fujitsu plasmavision - Basic Procedure of Adjustment Menu Operations

E-6
USING THE REMOTE CONTROL (Continued)
Point the remote control at the display’s signal receiver when using it.
Make sure that there are no obstacles between the remote control and the display’s signal receiver.
EFFECTIVE RANGE FOR THE REMOTE CONTROL
Left
Upper
Lower
Right
5 m (Front)
30°
30°
20°
20°
Note
The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the
remote control from a different position.
MHD01661-02_E.book 6 ページ ２００４年１２月２２日 水曜日 午後５時１５分