Fujitsu plasmavision - Initialization of User Adjustment Value

E-35
EnglishDeutschEspañolFrançaisItalianoPortuguês
日 本 語
Póññêèé
中文
INITIALIZATION OF USER ADJUSTMENT VALUE
You can restore the values of the adjustment/setting made in the MENU to factory settings.
1
Press ;.
The main menu screen will appear.
2
Press E or F to select “FACTORY
DEFAULT”.
Each time you press E or F, one of the available
menus appears in the following sequence:
PICTURE < POSITION/SIZE < AUDIO < FEATURES <
FACTORY DEFAULT
The FACTORY DEFAULT Menu screen will appear.
3
Press <.
• Displays the message of whether to proceed with the
initialization.
4
Press C or D to select the Yes.
5
Press <.
• The message of having completed the initialization
will be displayed after initializing.
6
Press ; when you finish.
(Ex. the W/R models)
“FACTORY DEFAULT” selected
in the main menu screen
Displays the message of
whether to proceed the
initialization
Displays the message of having
completed the initialization
MHD01661-02_E.book 35 ページ ２００４年１２月２２日 水曜日 午後５時１５分