6.1.1 Power supply unit configurations
Figure 27: Types of power supply units
I All different power supply units can be installed, removed or replaced in
the same way.
6.1.2 Assembly rules
– Mixed assembly of power supply units from different power classes (e.g.
class 1 or class 2) within a system is not released.
– Mixing of Platinum and Titanium power supply units within same class (e.g.
class 2) within a system is not released.
– Mixing of Platinum power supply units within same class and different
manufacturer (e.g. class 1) within a system is released.
– Always install a dummy cover into an unused PSU bay to comply with
applicable EMC regulations and satisfy cooling requirements.
– For a redundant power supply configuration you need always two power
supply units with the same power class.
Power class Number in figure Power item
1 1 450 W Platinum
2
2 800 W Platinum
3 800 W Titanium
To Next Page
Loading...
Need help?
General
Weight and Dimensions
