EasyManuals Logo

Fujitsu PRIMERGY RX2530 M2 User Manual

Fujitsu PRIMERGY RX2530 M2
372 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #327 background imageLoading...
Page #327 background image
RX2530 M1
Upgrade and Maintenance Manual 327
System board and components
15.6.3.2 Replacing the iRMC microSD card
Ê Remove the defective iRMC microSD card as described in section
"Removing the iRMC microSD card" on page 325.
Ê Install the new iRMC microSD card as described in section "Installing the
iRMC microSD card" on page 323.
15.6.3.3 Concluding steps
Ê If applicable, install the riser module 3 as described in section "Installing a
riser module" on page 63.
Ê "Reassembling" on page 54
Ê "Connecting the server to the mains" on page 60
Ê "Switching on the server" on page 61

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu PRIMERGY RX2530 M2 and is the answer not in the manual?

Fujitsu PRIMERGY RX2530 M2 Specifications

General IconGeneral
Processor seriesIntel Xeon E5-2600 v4
Processor socket-
Intel Xeon seriesE5-2600
Built-in processorNo
Motherboard chipsetIntel® C612
Compatible processor seriesIntel® Xeon® E5 Family
Number of processors supported2
ECCYes
Number of DIMM slots24
Supported memory typesDDR4-SDRAM
Maximum internal memory3072 GB
Storage drive sizes supported3.5 \
Supported storage drive typesHDD & SSD
Number of storage drives supported4
Supported storage drive interfacesSerial ATA, Serial Attached SCSI (SAS)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports5
PCI Express slots version3.0
Chassis typeRack (1U)
Product colorBlack
Operating temperature (T-T)5 - 45 °C
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Depth770.7 mm
Width483 mm
Height43 mm
Weight16000 g

Related product manuals