28 Service Supplement RX300 S3
Replacing the hot-plug PCI board Replacement routines
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: P:\RX300S3\RX300_S3_SS_bearbMoni\RX300S3_2x6HDD_ss_en\rx300s3-ss-e.k04
Ê Insert the light paths into B and dummy light paths into A.
Figure 16: Inserting the hot-plug board
Ê Insert the new board and press it down.
V CAUTION!
Be careful, the PCI holders are delicate and easily damaged. They
must lock correctly.
Information about the cabling you will find in the „appendix“ of the Options Guide
PRIMERGY RX300 S3.
To Next Page
Loading...
