Fujitsu Primergy RX300 S3 - Replacing the HDD Card; Removing the 2.5 HDD Cage

32 Service Supplement RX300 S3
Replacing the HDD card Replacement routines
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: P:\RX300S3\RX300_S3_SS_bearbMoni\RX300S3_2x6HDD_ss_en\rx300s3-ss-e.k04
4.7 Replacing the HDD card
4.7.1 Removing the 2.5“ HDD cage
Ê Remove the HDDs from the corresponding 2.5“ HDD cage. For the
discription see operating manual “hot-plug components, hot-plug Hard Disk
Drives“.
Please not the population sequence, that you can install the hard disk drives
in the same sequence.
Figure 22: 2.5“ HDD cage emty