Fujitsu Primergy RX300 S3 - Installing a New Hot-Plug PCI Board

RX300 S3 Service Supplement 27
Replacement routines Replacing the hot-plug PCI board
4.5.2 Installing a new hot-plug PCI board
Figure 14: Assembling the hot-plug board
Ê Attach the insulating foil on the rear side of the hot-plug board.
Ê Insert the bord into the hot-plug PCI holder.
Ê Insert the other two PCI holders.
Figure 15: Assembled hot-plug board
A
B
B