Fujitsu Primergy RX300 S4 - Configuration Diagram

RX300 S4 Options Guide 91
Appendix Configuration diagram
14.2 Configuration diagram
Figure 72: Part of the system configurator 3.5“ HDD
PS 1
Drive Area based on
3 different SAS-BP
SB D2519
T4 (ambient sensor, located
at ID-Temp board)
Drive Area based on
3 different SAS-BP
CPU 1
CPU 2
Memory
on Riser
Power
Back
p
lane
PS 2
redundant
FAN1
CPU
FAN1
SYS
Slots 2-7
FAN2
CPU
FAN3
CPU
FAN6
CPU
red
FAN5
CPU
red
FAN4
CPU
red
FAN2
SYS
red
FAN PS 2
FAN PS 1
Slot 1 D2507/D2516
HDD 3x3,5“
HDD 6x2,5“
HDD 3x3,5“
HDD 6x2,5“
HDD 1x3,5“+
TD / RDX
HDD 6x2,5“
Area for
FDD or Local View / CSS
on top and
ODD
at the bottom
T5 …T16
T1
T3
T2
T1 =Temp.sens. CPU 1
T2 =Temp.sens. CPU 2
T3 =Temp.sens. Board (not used for fan control)
T4 = Temp.sens. Ambient
T5 …T16=Temp.sens. AMB
TD/
RDX