50 Operating manual RX300 S5
Installing/removing the server in/from the rack Hardware installation
V CAUTION!
Ensure that the safety lock has been inserted before the server is
inserted!
Ê Repeat the above steps for the right-hand support system (with the front and
rear right support uprights).
Ê Fit the PRIMECENTER/DataCenter rack cable management as described in
the technical manual for the corresponding rack.
Preparing the server
Figure 10: Preparing the server
Ê Place the outer telescopic rails on the sides of the server (see arrow 1 in
figure 10). Slide the outer telescopic rails forwards to secure them (see
arrow 2 in figure 10).
2
1
To Next Page
Loading...
