48 Operating Manual RX600 S6
Hardware installation
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: C:\Programme\FCT\tim_app\tim_local\work\PICHOL\OBJ_DOKU-11938-001.fm
The standard connectors on the rear are marked with symbols, and one is color-
coded:
Figure 4: Connectors on the rear
Ê Connect the data cables to the server and peripherals.
I Connect keyboard and mouse via USB. There are no separate PS/2
connectors for them.
Connecting the monitor
Ê Plug the data cable for the monitor into the video connector on the server.
Alternatively, the video connector at the front or the rear of the server can be
used.
Ê Connect the power cord of the monitor to a grounded mains outlet of the in-
house mains and/or into the mains socket strip of the rack.
1 4x LAN connector 4 Video connector (blue)
2 Serial connector COM1 5 Management LAN connector
3 2 x USB connector
/
0
1
3
2
To Next Page
Loading...
